NLRinse System
Rinse aid spilled over can cause
excessive foaming during the wash
cycle.
11 Rinse System
11.1 Rinse aid
4.
Close the lid of the rinse aid
reservoir.
For optimal drying results it is best
to use the rinse aid.
Only use rinse aid for household
dishwashers.
aThe lid audibly clicks into place.
11.2 Setting the rinse aid
amount
Filling rinse aid
If streaks or water spots remain on the
dishes, adjust the amount of rinse aid.
1.
Press.
If the rinse aid refill indicator lights up,
add rinse aid. Only use rinse aid for
household dishwashers.
1.
Press and lift the tab on the lid of
the rinse aid reservoir .
2.
Approx. 3 seconds on
to access the basic settings.
pressure-
aThe display shows Hxx. aThe
display shows
to give.
3.
Just as often on
until the display shows the factory
set value r05.
4.
Just as often on
press to
the desired amount of rinse aid
has been set.
reflected
to press
2
– A low setting adds less rinse aid
during the wash cycle, reducing
the streaks on the dishes.
– A higher setting adds more rinse
aid during the wash cycle,
reducing water spots and
improving drying results.
1
2.
Top up the rinse aid up to the max
mark.
max
5.
To save the settings, press . for
about 3 seconds
to press.
11.3 Switching off the rinse aid
system
3.
If rinse aid is running,
it must be removed
from the holder
ddel has been transferred
the rinse aid
widened.
If the rinse aid refill indicator bothers
you, e.g. if you use a combined
dishwasher detergent with rinse aid
28