en
Basic settings
36
Basic setting
Display text Selection
Description
Wi-Fi
Cn0
Cn0 - Cn1
Switch the wireless network
connection on or off.
Level "Cn0" switches the
wireless network connection
off.
The basic setting "Wi-Fi" is
only available once the ap-
pliance is connected to the
Home Connect app.
→
Remote Start
rc1
rc0 - rc2
Activate or deactivate
→
.
The following settings are
possible:
¡
With the setting "rc0", the
function is permanently
deactivated.
¡
With the setting "rc1", the
function can be selected
via the button.
→
¡
With the setting "rc2", the
function is permanently
activated.
This basic setting is not
available until after you have
connected the device with
the Home Connect app.
→
Factory setting
rE
Start with
YES
Confirm with
Restore changed settings to
the factory settings.
The settings for initial start-
up must be configured.
1
Factory setting (may vary according to model)
15.2 Changing basic settings
1.
Press .
2.
To open the basic settings, press
for 3 seconds.
a
The display shows Hxx.
a
The display shows
.
3.
Press
repeatedly until
the display shows the required set-
ting.
4.
Press
repeatedly until the dis-
play shows the right value.