Technical data
11.3 Electronics
SMD 18101 CS / SMD 18101 CP / SMD 18101 D
11-2
Instruction Manual, 11/2005, A5E00472377A-002
11.3
Electronics
Multi-standard technology
Video modes with resolutions less than 1280 x
1024 are expanded to the TFT resolution, and
thus utilize the full display area (like multi-sync
CRTs)
Timing recognition
H frequency, V frequency, interlaced, H scan rate
11.4
RGB input
Analog
Synchronization
•
Horizontal
30 kHz ... 97 kHz
•
Vertical
50 Hz ... 120 Hz
RGB signals
Analog, nominal 0.7 V
max.
into 75 Ω.
Maximum permitted is 1 V between black value
and maximum saturation.
Video signal
Analog, nominal 0 ... 1.0 V
max.
into 75 Ω.
Sync pulses on R and B picture and blanking
signals
Permitted
DC voltage superimposed on picture and picture
blanking signals
Must not fall below or exceed -1 V ... +2 V at the
RGB picture and blanking inputs.
Synchronism signals
•
S.1:
H/V-SYNC separate, in the combinations:
H + V, with TTL-level into 2 kΩ
H - V, with TTL-level into 2 kΩ
•
S.2:
C-SYNC separate, in the combinations:
+C-SYNC, with TTL-level into 2 kΩ
-C-SYNC, TTL-level into 2 kΩ
1)
•
S.3:
C-SYNC on green, min. amplitude 0.2 V
Signal combinations
•
K.1:
RGB and picture blanking signals analog,
H/V-SYNC separate
•
K.2:
RGB and picture blanking signals analog,
C-SYNC separate
1)
•
K.3:
RGB and picture blanking signals analog,
C-SYNC on green (SoG)
Signal inputs via BNC
Assignment of the 5x BNC sockets
2)
:
•
Socket 1:
RED
•
Socket 2:
GREEN/SoG
