manualshive.com logo in svg

Siemens SIWAREX WL230 BB-S SA, Руководство по эксплуатации

Поделиться
Скачать
Siemens SIWAREX WL230 BB-S SA Скачать руководство пользователя страница 21

Installing

4

4.1

Basic safety instructions

Load cells are precision components and must therefore be handled carefully. Particular care 
must be taken during transport and installation.

DANGER

Danger to life from falling loads
• Load cells are not machine components which have been constructed with the normal 

safety factors. For this reason, appropriate protection against falling and catastrophes must 
be implemented in accordance with the potential risks.

• Use suitable hoisting equipment to lift the load carrier. Observe the appropriate safety 

regulations.

NOTICE
Damage to load cells through incorrect handling
• SIWAREX load cells are only permitted to be mounted and connected by qualified personnel.
• Mechanical shocks or falls can irreparably damage the load cell.
• When mounting the load cell, ensure that you do not damage or cut the cables of the load 

cell. Load cells must not be carried by their connecting cables.

• Protect the load cells from shocks and welding currents. Replace the load cells with 

dummies until the installation work on the scale structure is completed.

NOTICE
Damage to load cells through high currents
• If welding is undertaken after the load cells have been installed, ensure that the welding 

current is not diverted through the load cells.
– You can do this by attaching the grounding clamp of the welding unit making reliable 

contact close to the weld.

– Bridge the load cells with a grounding cable.
– Disconnect the individual load cells.

• Undesirable electrical currents can arise during lightning. To protect the load cells against 

such currents, bridge the load cells using highly flexible grounding cables.

SIWAREX WL200
Operating Instructions, 12/2021, A5E02199611B-13

21

Содержание SIWAREX WL230 BB-S SA



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды