Siemens SIWAREX WL200 Series Скачать руководство пользователя страница 8

Страница: 8 / 102

Introduction

1.3 Checking the consignment

SIWAREX WL200

Operating Instructions, 07/2016, A5E02199611B-03

1.3

Checking the consignment

Check the packaging and the delivered items for visible damage.

Report any claims for damages immediately to the shipping company.

Retain damaged parts for clarification.

Check the scope of delivery by comparing your order to the shipping documents for

correctness and completeness.

WARNING

Using a damaged or incomplete device
Danger of explosion in hazardous areas.

•

Do not use damaged or incomplete devices.

1.4

Transportation and storage

To guarantee sufficient protection during transport and storage, observe the following:

●

Keep the original packaging for subsequent transportation.

●

Devices/replacement parts should be returned in their original packaging.

●

If the original packaging is no longer available, ensure that all shipments are properly

packaged to provide sufficient protection during transport. Siemens cannot assume

liability for any costs associated with transportation damages.

CAUTION

Insufficient protection during storage
The packaging only provides limited protection against moisture and infiltration.

•

Provide additional packaging as necessary.

Special conditions for storage and transportation of the device are listed in Technical data

(Page 45).

1.5

Notes on warranty

The contents of this manual shall not become part of or modify any prior or existing

agreement, commitment or legal relationship. The sales contract contains all obligations on

the part of Siemens as well as the complete and solely applicable warranty conditions. Any

statements regarding device versions described in the manual do not create new warranties

or modify the existing warranty.
The content reflects the technical status at the time of publishing. Siemens reserves the right

to make technical changes in the course of further development.

Содержание SIWAREX WL200 Series







































































































Результаты поиска

Содержание SIWAREX WL200 Series

Отзывы:

Бренды по названию

Популярные бренды

Siemens SIWAREX WL200 Series, Руководство по эксплуатации

Результаты поиска

Содержание SIWAREX WL200 Series

Отзывы:

Бренды по названию

Популярные бренды