Siemens SIWAREX WL200 Series Скачать руководство пользователя страница 10

Страница: 10 / 102

Safety instructions

2.2 Improper device modifications

SIWAREX WL200

Operating Instructions, 07/2016, A5E02199611B-03

2.2

Improper device modifications

WARNING

Improper device modifications
Danger to personnel, system and environment can result from modifications to the device,

particularly in hazardous areas.

•

Only carry out modifications that are described in the instructions for the device. Failure

to observe this requirement cancels the manufacturer's warranty and the product

approvals.

2.3

Requirements for special applications

Due to the large number of possible applications, each detail of the described device

versions for each possible scenario during commissioning, operation, maintenance or

operation in systems cannot be considered in the instructions. If you need additional

information not covered by these instructions, contact your local Siemens office or company

representative.

Note
Operation under special ambient conditions
We highly recommend that you contact your Siemens representative or our application

department before you operate the device under special ambient conditions as can be

encountered in nuclear power plants or when the device is used for research and

development purposes.

2.4

Use in hazardous areas

Qualified personnel for hazardous area applications
Persons who install, connect, commission, operate, and service the device in a hazardous

area must have the following specific qualifications:

●

They are authorized, trained or instructed in operating and maintaining devices and

systems according to the safety regulations for electrical circuits, high pressures,

aggressive, and hazardous media.

●

They are authorized, trained, or instructed in carrying out work on electrical circuits for

hazardous systems.

●

They are trained or instructed in maintenance and use of appropriate safety equipment

according to the pertinent safety regulations.

Содержание SIWAREX WL200 Series







































































































Результаты поиска

Содержание SIWAREX WL200 Series

Отзывы:

Бренды по названию

Популярные бренды

Siemens SIWAREX WL200 Series, Руководство по эксплуатации

Результаты поиска

Содержание SIWAREX WL200 Series

Отзывы:

Бренды по названию

Популярные бренды