Programming
in STEP 7-Micro/Win
8 Programming in STEP 7-Micro/Win
8.1 General
At least STEP 7 Micro/Win Version 4.0 SP2 is required for programming.
SIWAREX MS was developed specifically for operation with the SIMATIC S7-200.
The hardware setup is described in chapter
Hardware configuration.
SIWAREX MS is used similar to an analog expansion module.
A MicroScale library is delivered with the configuration package, which is required
for operating the SIWAREX MS.
A complete project – “Getting Started” is also available. Creating application
software is described in the “Getting Started”, which is also used in Micro Set 6.
We recommend using the program and expanding it for different applications.
8.2 Presetting the System Data Module
The system data module must be adapted during the configuration of the expansion module
SIWAREX MS. The intended analog input range (AEW) is not to be filtered for the
SIWAREX MS!
Figure 8-1
System data module before the adjustment
The filter is deactivated after the adjustment.
SIWAREX MS 8-43