Siemens SITRANS P500, Руководство по эксплуатации, Страница: 138 / 238

Operate
6.2 Parameter description
SITRANS P500 with HART
138
Operating Instructions, 12/2014, A5E02344528-09
6.2.5 "4 Communication"
6.2.5.1 "4.1 Protocol"
Display: HART
Purpose: Display the communication protocol
Description: This parameter records the factory-set protocol that is available.
6.2.5.2 "4.2 ... 4.20 HART-Variable4"
In this submenu you define the additional data and command descriptions that you need to
identify your device. The distinction is made between data that you can set yourself and
values that are pre-set in the factory. The default values are write-protected and cannot be
changed by the user. The corresponding allocation is set out below:
Menu entry Designation Adjustable
(factory
setting)
Default
4.2 Shortaddress X
(0)
-
4.3 Analog Output ( "4.3 Analog Output" (Page 139) ) X
(active)
4.4 Longaddress - X
4.5 HART Device Id X
(0)
-
4.6 Transmitter Rev - X
4.7 HART Firmware Rev - X
4.8 HART Hardware Rev - X
4.9 EDD Rev - X
4.10 HART Rev - X
4.11 Universal Rev - X
4.12 Common Practice Rev - X
4.13 Devicespec. Rev - X
4.14 Min. No Requestpreambles - X
4.15 Response Preambles X
(5)
-
4.16 Max.No HART-Variables - X
4.19.. 4.20 HART-Variable 1 .. HART-Variable4 - X