Siemens SITRANS P500, Руководство по эксплуатации, Страница: 124 / 238

Operate
6.2 Parameter description
SITRANS P500 with HART
124
Operating Instructions, 12/2014, A5E02344528-09
Menu entry Designation Adjusta-
ble
Pre-set Factory setting
•
3.2.6.10
–
3.2.6.10.1
– 3.2.6.10.2
– 3.2.6.10.3
– 3.2.6.10.4
– 3.2.6.10.5
– 3.2.6.10.6
– 3.2.6.10.7
Sensor
Sensor Serial No
Sensor Order Number
Module Range Code
Lower Range Limit
Upper Range Limit
Minimal Span
Firmware SENSOR
-
-
-
-
-
-
- X
X
X
X
X
X
X
in accordance with the measuring cell selection/
device manufacture
e.g. 7MF5944-1DA1
1)
e.g. -250...250 mbar
1)
e.g. -250 mbar
2)3)
e.g. 250 mbar
2)3)
e.g. 1.25 mbar at 250 mbar
2)
in accordance with the measuring cell selection/
device manufacture
3.2.7 Firmware Device - X in accordance with the measuring cell selection/
device manufacture
3.2.8 Hardware Device - X in accordance with the measuring cell selection/
device manufacture
1)
in accordance with the order
2)
in accordance with the measuring cell selection/ device manufacture
3)
Max. +10 % depending on the installation position, sensor trim
6.2.4.3 "3.3 Process Variables"
"3.3.1 Current Out"
Display: 3,55 ... 23 mA
Purpose: Displays the output current
Description: This parameter shows the current digital value of the output current. For
deviations from the analog output current, use the function "2.4.3.1 DA-
Converter" (Page 106).
"3.3.2 ... 3.3.10 User"
The menus show the measured value in the unit you selected.
Menu entry Designation
3.3.2 PV Percent Range
3.3.3 Pressure
•
3.3.3.1
• 3.3.3.2
•
3.3.3.3
Untrimmed Pressure
Static Pressure
Pressure
3.3.4 Temperature
• 3.3.4.1
•
3.3.4.2
Sensor Temperature
Electronic Temperature