Siemens SITRANS P500, Руководство по эксплуатации, Страница: 123 / 238

Operate
6.2 Parameter description
SITRANS P500 with HART
Operating Instructions, 12/2014, A5E02344528-09
123
6.2.4 "3 Diagnostics"
6.2.4.1 "3.1 Alarm list"
Display: List of all alarms, starting with the most serious.
Purpose: View of all alarms with descriptions.
Description: Only one alarm - the most serious one - is displayed in the measured value
view. The alarm list lists all alarms.
Definitions, causes and actions of all alarms can be found found in section
Alarm, error and system messages (Page 185).
6.2.4.2 "3.2 Identification"
In this submenu you define the data that you need to identify your device. A distinction is
made between data you can set yourself and values that are preset in the factory. The
default values are write-protected and cannot be changed by the user. The corresponding
allocation is set out below:
Menu entry Designation Adjusta-
ble
Pre-set Factory setting
3.2.1 TAG X - in accordance with the order
3.2.2 Long Tag X - in accordance with the order
3.2.3 Description X - AAAAA
3.2.4 Message X - AAAAA
3.2.5 Installation Date X - dd.mm.yyyy
3.2.6 Pressure transmitter
• 3.2.6.1
Manufacturer_id - X Siemens
•
3.2.6.2
Device Type - X SITRANS P500
•
3.2.6.3
Order Number - X e.g. 7MF5303...
1)
•
3.2.6.4
Order-No Extension - X e.g. A30, J01, Y21 1)
• 3.2.6.5
Type of pressure trans-
mitter
- X e.g. Diff. Pres PN160
1)
•
3.2.6.6
Fabrication Number - X in accordance with the measuring cell selection/
device manufacture
•
3.2.6.7
Final Assembly No - X in accordance with the measuring cell selection/
device manufacture
•
3.2.6.8
Firmware DAC - X in accordance with the measuring cell selection/
device manufacture
•
3.2.6.9
Firmware COMM - X in accordance with the measuring cell selection/
device manufacture