WARNING
Replacing components in hazardous areas
The suitability of the equipment according to CSA for Class I, Division 1 and 2 may be impaired
when a component is replaced.
● Only use original accessories and original spare parts.
7.4
Return procedure
Enclose the bill of lading, return document and decontamination certificate in a clear plastic
pouch and attach it firmly to the outside of the packaging.
Required forms
● Delivery note
● Return document (
http://www.siemens.com/processinstrumentation/returngoodsnote
)
with the following information:
– Product (item description)
– Number of returned devices/replacement parts
– Reason for returning the item(s)
● Decontamination declaration (
http://www.siemens.com/sc/declarationofdecontamination
)
With this declaration you warrant "that the device/replacement part has been carefully
cleaned and is free of residues. The device/replacement part does not pose a hazard for
humans and the environment."
If the returned device/replacement part has come into contact with poisonous, corrosive,
flammable or water-contaminating substances, you must thoroughly clean and
decontaminate the device/replacement part before returning it in order to ensure that all
hollow areas are free from hazardous substances. Check the item after it has been cleaned.
Any devices/replacement parts returned without a decontamination declaration will be
cleaned at your expense before further processing.
Service and maintenance
7.4 Return procedure
SITRANS P220
24
Compact Operating Instructions, 02/2019, A5E03304437-AB
