Siemens SITRANS LG260 Скачать руководство пользователя страница 10

Страница: 10 / 96

PBD-51041059

SITRANS LG260 - Operating Instructions

44284-EN-171021

Up to the time of installation, the packages must be left closed and

stored according to the orientation and storage markings on the

outside.
Unless otherwise indicated, the packages must be stored only under

the following conditions:

•

Not in the open

•

Dry and dust free

•

Not exposed to corrosive media

•

Protected against solar radiation

•

Avoiding mechanical shock and vibration

•

Storage and transport temperature see chapter "Supplement -

Technical data - Ambient conditions"

•

Relative humidity 20 … 85 %

With an instrument weight of more than 18 kg (39.68 lbs) suitable and

approved equipment must be used for lifting and carrying.

3.4 Accessories and replacement parts

The display and adjustment module LG Local Display Interface is

used for measured value indication, adjustment and diagnosis. It can

be inserted into the sensor and removed at any time.

You can find additional information in the operating instructions

manual "LG Local Display Interface" (Document-ID 43838).

The LG Remote Interface is an external display and adjustment unit

for sensors with single chamber housing and Ex-d double chamber

housing.
It is suitable for measured value indication and adjustment of sensors

and is connected to the sensor with a four-wire standard cable up to

50 m (164 ft) long.

You can find additional information in the operating instructions

manual "LG Remote Interface".

Screwed flanges are available in different versions according to the

following standards: DIN 2501, EN 1092-1, ASME B 16.5, JIS B 2210-

1984, GOST 12821-80.

You can find additional information in the supplementary instructions

manual "Flanges according to DIN-EN-ASME-JIS" (Document-ID

47574).

The electronics module SITRANS series LG is a replacement part for

TDR sensors of SITRANS series LG. There is a different version avail

able for each type of signal output.

You can find further information in the operating instructions manual

"Electronics module SITRANS series LG".

The electronics module Modbus is a replacement part for TDR sen-

sors of SITRANS series LG.

Storage

Storage and transport

temperature

Lifting and carrying

Display and adjustment

module

External display and

adjustment unit

Flanges

Electronics module

Electronics module,

Modbus

Содержание SITRANS LG260

































































































Результаты поиска

Содержание SITRANS LG260

Отзывы:

Siemens SITRANS LG260, Руководство по эксплуатации, Страница: 10 / 96

Результаты поиска

Содержание SITRANS LG260

Отзывы: