Siemens SITRANS L, Руководство по эксплуатации, Страница: 58 / 269

Commissioning
6.3 Application examples
SITRANS LR250 with FOUNDATION FIELDBUS
58
Operating Instructions, 09/2021, A5E32221411-AH
① Confidence ⑦ Zoom
② Distance from Low Calibration Point to vertical cross-hair ⑧ Measure
③ Algorithm: t F (trueFirst) ⑨ Exit
④ Distance from flange face to target ⑩ Exit icon selected
⑤ Pan left/right - selected ⑪ Exit icon deselected
⑥ Pan up/down
• Use UP or DOWN arrow to scroll to an icon. When an icon is highlighted, that
feature becomes active.
• To move a cross-hair, press RIGHT arrow to increase the value, LEFT arrow to
decrease.
• To Zoom into an area, position the intersection of the cross-hairs at the center of that
area, select Zoom , and press RIGHT arrow. Press LEFT arrow to Zoom out.
• To update the profile, select Measure and press RIGHT arrow.
• To return to the previous menu, select Exit then press RIGHT arrow.
6.2.3.5 Device Address
Note
The address can only be changed from a remote master such as NI-FBUS Configurator or
DeltaV. See Addressing in manual Foundation Fieldbus for Level Instruments
(7ML19985MP01) for further details.
Read only. The unique address of the device on the network.
Values Temporary range during initial commissioning: 248 - 251. Permanent range
after commissioning complete (written to non-volatile memory in the device):
16-247
• In PROGRAM mode, navigate to: Level Meter > Communication (5.) > Device Address
(5.2.) to view the device address.
• Press Mode to return to Measurement mode.
6.3 Application examples
Note
In the applications illustrated below, values are for example purposes only.