Siemens SITRANS L Series Скачать руководство пользователя страница 70

Страница: 70 / 106

Setup with the integrated HMI

7.9 Communication

7.9

Communication

7.9.1

HART address

Function

POLLING ADR:

Sets the device address in a HART network.
For point-to-point configurations the standard address is zero (0).
For multidrop configurations, use a non-zero HART address, i.e. 1 to 63.

7.10

Safety

7.10.1

user PIN

Is used to activate/deactivate the user PIN. If the user PIN is activated, a PIN must be

entered when changing parameter settings.

Note

The device is unlocked on delivery.
A change of the setting for parameter "

User PIN

does not take effect

immediately.

After changing the setting, the device must be restarted or ten (10)

minutes must

elapse before the change takes effect.

Setting

Selection

Description

ACTIVT

Activate User PIN
Display = OK

USER PIN

CANCL

Deactivate User PIN
Display = ENABL

7.10.2

Bluetooth PIN

BLUETOOTH PIN:

In this menu item, you can change the factory-preset Bluetooth access code to your

personal Bluetooth access code.

Note

The individual preset Bluetooth access code of the device can be found on the

supplied information sheet "

Device Bluetooth and Parameter Access Codes

. If this

SITRANS LR150

Operating Instructions, 08/2020,

A5E50352155

Содержание SITRANS L Series











































































































Результаты поиска

Содержание SITRANS L Series

Отзывы:

Siemens SITRANS L Series, Руководство по эксплуатации, Страница: 70 / 106

Результаты поиска

Содержание SITRANS L Series

Отзывы: