Siemens SITRANS L Series Скачать руководство пользователя страница 62

Страница: 62 / 106

Setup with the integrated HMI

7.7.7 Custom

Upper scaling point

UPPER SCALING:

Sets the maximum scaled measured value.

Note

If the parameter "

Measurement

end

is set in the "

Quick commissioning wizard

parameter "

Upper scaling point

is automatically set to the same value.

If the value for one of these parameters is set outside the wizard, the other value is

not automatically adjusted.

7.7.7

Custom

This menu is only visible on the device if the vessel shape "

Custom specific

configured for the volume flow mode or if the measuring structure "

Custom

specific

is configured for the volume flow mode.

Upper scaling point

UPPER SCLNG:

Sets the maximum scaled measured value.

Note

If the parameter "

Measurement end

is set in the "

Quick commissioning wizard

parameter "

Upper scaling point

is automatically set to the same value.

If the value for one of these parameters is set outside the wizard, the other value is

not automatically adjusted.

Custom specific characteristics

CUSTOM CURVE:

Is used to enter the index markers level and output for universal measuring

structures.
If the vessel shape (volume) or the measuring structure (volume flow) is more

complex than the standard shapes, the shape can be determined section by section.

Each input index marker (level) is assigned a value and each output index marker

(volume or volume flow) a corresponding value.
• Level values are determined in units
• Volume values are determined in volume units
• Volume flow values are determined in volume flow units

SITRANS LR150

Operating Instructions, 08/2020,

A5E50352155

Содержание SITRANS L Series











































































































Результаты поиска

Содержание SITRANS L Series

Отзывы:

Siemens SITRANS L Series, Руководство по эксплуатации, Страница: 62 / 106

Результаты поиска

Содержание SITRANS L Series

Отзывы: