manualshive.com logo in svg

Siemens SITRANS L Series, Руководство по эксплуатации, Страница: 22 / 106

Поделиться
Скачать
Siemens SITRANS L Series Скачать руководство пользователя страница 22

Installing/mounting

4

4.1

General instructions

Ambient conditions

The transmitter is suitable for standard and extended ambient conditions acc. to DIN/

EN/IEC/ANSI/ISA/UL/CSA 61010-1. It can be used indoors as well as outdoors.

Process conditions

Note

For safety reasons, the transmitter must only be operated within the permissible

 

process conditions. You can find detailed information on the process conditions in

 

chapter " 

Technical data

"

 of the operating instructions or on the nameplate.

Hence make sure before mounting that all parts of the transmitter exposed to the

process are suitable for the existing process conditions.
These are mainly:
• Active measuring component
• Process fitting
• Process seal
Process conditions in particular are:
• Process pressure
• Process temperature
• Chemical properties of the medium
• Abrasion and mechanical influences

4.2

Mounting instructions

Polarisation

Radar transmitters for level measurement emit electromagnetic waves. The

polarization is the direction of the electrical component of these waves.

SITRANS LR150

Operating Instructions, 08/2020, 

A5E50352155

13

Содержание SITRANS L Series











































































































Отзывы:

Нет отзывов