Note
Items numbers may not appear sequentially
Although item numbers are sequential, they may not appear so as some menus and
parameters are only visible on the device based on configuration settings.
7.2.6
Programming
From measurement view, press button to enter parameter view and open the first menu
level M 01.
To select a listed option:
1. Navigate to the desired parameter.
2. Press button to open edit view. The current selection is highlighted.
3. Scroll to a new selection using and buttons.
4. Press button to accept it. The display returns to parameter view and shows the new
selection.
To change a numeric value:
1. Navigate to the desired parameter.
2. When selected, the current value is displayed.
3. Press button to configure it. The "EDIT" symbol is flashing.
4. Use and buttons to increase or decrease the value. Press and hold button to increase
scrolling speed.
5. To escape without saving your changes, press button to return to parameter view.
6. Press button to accept the new value. The display returns to parameter view ("EDIT"
symbol is no longer flashing) and shows the new selection. Review for accuracy.
Button functions for editing
Button
Name
Function
UP or DOWN
arrow
Selecting parameter set‐
tings
Scrolls to item
Alpha-numeric editing
Increases or decreases value. Pressing and
holding will increase scrolling speed through
values.
RIGHT arrow
Selecting parameters
Accepts the data (writes the parameter setting)
LEFT arrow
Selecting parameter set‐
tings
Cancels edit view without changing the param‐
eter setting.
Commissioning
7.2 Local commissioning
SITRANS Probe LU240 with mA/HART
Compact Operating Instructions, 10/2018, A5E42673704-AB
33
