manualshive.com logo in svg

Siemens SITRANS FUP1010, Руководство по эксплуатации, Страница: 117 / 208

Поделиться
Скачать
Siemens SITRANS FUP1010 Скачать руководство пользователя страница 117

 

Note
Siemens Flow Instrument defines sensors as non-repairable products.   

 

Technical Support   

If you have any technical questions about the device described in these Operating Instructions 

and do not find the right answers, you can contact Technical Support:
● Via the Internet using the Support Request: 

Service and support (

http://www.siemens.com/automation/service&support

)

Further information about our technical support is available in the Internet at 

Local contact person (

http://www.automation.siemens.com/partner

) 

Service & Support on the Internet    

In addition to our documentation, we offer a comprehensive knowledge base online on the 

Internet at: 
Technical support (

http://support.automation.siemens.com/WW/view/en/16604318

) 

There you will find:
● The latest product information, FAQs, downloads, tips and tricks.
● Our newsletter, providing you with the latest information about your products.
● A Knowledge Manager to find the right documents for you.
● Our bulletin board, where users and specialists share their knowledge worldwide.
● You can find your local contact partner for the Industry Automation Division in our partner 

database.

● Information about field service, repairs, spare parts and lots more under "Services."

Additional Support  

Please contact your local Siemens representative and offices if you have additional questions 

about the device
Find your contact partner at:
Support request (

http://www.siemens.com/automation/support-request

) 

9.5

Return procedures

Enclose the delivery note, the cover note for return delivery together with the declaration of 

decontamination form on the outside of the package in a well-fastened clear document pouch. 

Maintenance and service

9.5 Return procedures

FUP1010 IP67 Portable Flowmeter

Operating Instructions, 02/2010, A5E02951522A Revision 01

115

Содержание SITRANS FUP1010

















































































































































































































Отзывы:

Нет отзывов