manualshive.com logo in svg

Siemens SITRANS FUH1010, Инструкция по эксплуатации товара, Страница: 11 / 264

Поделиться
Скачать
Siemens SITRANS FUH1010 Скачать руководство пользователя страница 11

Introduction 

 

1.3 Further Information 

 

FUH1010 IP65 NEMA 4X Precision Volume 

10

 

Operating Instructions, 01/2013, A5E32122003-AA 

1.3

 

Further Information 

Product information on the Internet  

The Operating Instructions are available on the CD-ROM shipped with the device, and on 

the Internet on the Siemens homepage, where further information on the range of SITRANS 

F flowmeters may also be found: 
Product information on the internet (

http://www.siemens.com/flow

)  

Worldwide contact person  

If you need more information or have particular problems not covered sufficiently by these 

Operating Instructions, get in touch with your contact person. You can find contact 

information for your local contact person on the Internet: 
Local contact person (

http://www.automation.siemens.com/partner

)  

The contents of this manual shall not become part of or modify any prior or existing 

agreement, commitment or legal relationship. The sales contract contains all obligations on 

the part of Siemens as well as the complete and solely applicable warranty conditions. Any 

statements regarding device versions described in the manual do not create new warranties 

or modify the existing warranty. 
The content reflects the technical status at the time of publishing. Siemens reserves the right 

to make technical changes in the course of further development. 

Содержание SITRANS FUH1010









































































































































































































































































Отзывы:

Нет отзывов