manualshive.com logo in svg

Siemens SITRANS FM MAG 8000 IIoT, Руководство по эксплуатации

Поделиться
Скачать
Siemens SITRANS FM MAG 8000 IIoT Скачать руководство пользователя страница 9

Safety notes

2

2.1

Preconditions for use

This device left the factory in good working condition. In order to maintain this status and to 
ensure safe operation of the device, observe these instructions and all the specifications relevant 
to safety.

Observe the information and symbols on the device. Do not remove any information or symbols 
from the device. Always keep the information and symbols in a completely legible state.

2.1.1

Laws and directives

General requirements

Installation of the equipment must comply with national regulations: for example EN 60079-14 
for the European Community.

Observe ALL test certification, provisions and laws applicable in your country during connection, 
assembly and operation.     

FCC NOTICE

This device complies with part 15 of the FCC rules. Operation is subject to the following two 
conditions: (1) This device may not cause harmful interference, and (2) this device must accept 
any interference received, including interference that may cause undesired operation. Any 
changes or modifications not expressly approved by Siemens could void the user's authority to 
operate this equipment.

Instrument safety standards

The device has been tested at the factory, based on the instrument safety standards. In order to 
maintain this condition over the expected life of the device the requirements described in these 
operating instructions must be observed.

CE-marked equipment

The CE mark on the device symbolizes the compliance of the device with the following directives:

Radio and telecommunica‐
tions
terminal equipment
R&TTE 1999/5/EC

Directive of the European Parliament and of the Council on radio 
equipment and telecommunications terminal equipment and the 
mutual recognition of their conformity.

SITRANS FM MAG 8000 IIoT Wireless Communication Module
Operating Instructions, 07/2022, A5E52070595A-AA

9

Содержание SITRANS FM MAG 8000 IIoT



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды