manualshive.com logo in svg

Siemens SITRANS FM MAG 8000 IIoT, Руководство по эксплуатации

Поделиться
Скачать
Siemens SITRANS FM MAG 8000 IIoT Скачать руководство пользователя страница 39

Parameter assignment

8

8.1

Parameter list

Parameter

Description

Default 
value

Min. val‐
ue

Max. value

Log Verbosity Level 

1)

Defines the information saved on the mi‐
croSD card.
• 0 : disabled
• 1 : error
• 2 : warnings
• 3 : error + wa info
Please be aware of higher battery con‐
sumption and microSD memory usage. 
Siemens recommends keeping the default 
value.

1

0

3

Firmware Version

Firmware Version of the IIoT Wireless Com‐
munication Module.

Read only

Network Signal Strength

Network Signal Strength from 0 (lowest) 
to 5 (strongest). 

Read only

Paging Interval 

1)

Paging interval (in seconds) where the IIoT 
Wireless Communication Module wakes 
up and connects to the mobile network to 
execute any read/write requests.
 
The lower the value, the higher the bat‐
tery consumption.
Recommendation: Configure this parame‐
ter to less than one hour only for startup 
and then set it back to greater than one 
hour for regular operation.

3600

300

2678400

Timestamp

UTC Unix time → always GMT in seconds 
from 1970

Read only

Paging Control

Enable paging interval (if disabled, the 
read/write requests will be executed dur‐
ing transmission intervals).

true

false

true

Auto Adaptive Control

Sets up the transmission interval to 30 min 
in case the MAG 8000 is in mains powered 
operation.

false

false

true

Last Interval Modification Time

Not active in current release.

Read only

Analog Value 1

Value in millivolts [0 - 5000]. Returns 0 if 
“Analog Inputs Acquisition Control" is dis‐
abled.

Read only

Analog Value 2

Read only

Battery Remaining

Capacity of the MAG 8000 main battery in 
%

Read only

SITRANS FM MAG 8000 IIoT Wireless Communication Module
Operating Instructions, 07/2022, A5E52070595A-AA

39

Содержание SITRANS FM MAG 8000 IIoT



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды