Operating
7
7.1
Function button
Three functions can be performed by pressing the function button on the IIoT Wireless
Communication Module.
Function
Duration of button
press
Description
LED behavior
Manual paging
5 seconds
Module wakes up and connects to the mo‐
bile network to check for new messages.
green lights up once
Hot swapping of
microSD card
10 seconds
The microSD card can be removed without
triggering an alarm. A microSD card must be
inserted again before returning to opera‐
tion.
green lights up twice
after releasing the push button
blue lights up permanently
10 seconds
The Wireless Communication Module re‐
turns back to operation and can use the mi‐
croSD card again.
green lights up twice and goes off
after releasing the push button
Module reset
20 seconds
Resets all IIoT Wireless Communication Mod‐
ule parameters to their default values.
green lights up three times
Note
Network communication
The green and blue LED will also light up to indicate network communication.
7.2
Reading and changing parameters
Before you start
• Register your device: Registering your device (Page 29)
• Log on at IIoT web application (
http://www.siemens.com/mag8000iiotwebapplication
Procedure
1. On the left select a device. You will see all active alarms for your device.
2. Click on the tab "Device Properties".
3. Filter the parameters by selecting a category.
SITRANS FM MAG 8000 IIoT Wireless Communication Module
Operating Instructions, 07/2022, A5E52070595A-AA
31
