manualshive.com logo in svg

Siemens SITRANS FC430, Руководство по эксплуатации

Поделиться
Скачать
Siemens SITRANS FC430 Скачать руководство пользователя страница 97

6.1.1

Warnings

CAUTION

Sensor and transmitter ordered separately
If the sensor and the transmitter are ordered separately, a "Set To Default" routine must be 

performed. This can be done via SIMATIC PDM or via menu item 3.3.3 in HMI.

WARNING

Dangerous high voltage
Certain parts inside the device carry dangerous high voltage. The housing must be closed 

and grounded before switching on the device.   

WARNING

Improper handling
The sensor connected to this device can be operated with high pressure and corrosive media. 

Therefore improper handling of the device can lead to serious injuries and/or considerable 

material damage.

6.2

General requirements

Before commissioning it must be checked that:
● The device has been installed and connected in accordance with the guidelines provided 

in Installing/mounting (Page 41) and Connecting (Page 63).

● Device installed in hazardous areas meets the requirements described in Use in hazardous 

areas (Page 17).

6.3

Local commissioning

6.3.1

Local display

The device is commissioned/operated with the touch keypad on the local display. 
The elements are actuated by touching the glass panel on the appropriate key. Pressing harder 

will not activate the key, but using a thumb instead of a finger tip will help. The text display 

above the operating elements gives a menu-guided operation of the individual device function/

parameters. Successful operation of the key is confirmed by a small green LED at the right of 

the display. 

Commissioning

6.3 Local commissioning

FC430 (From firmware 4.0)

Operating Instructions, 06/2017, A5E39789392-AA

97

Содержание SITRANS FC430























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды