manualshive.com logo in svg

Siemens SITRANS FC430, Руководство по эксплуатации

Поделиться
Скачать
Siemens SITRANS FC430 Скачать руководство пользователя страница 313

C.3

Setting up custody transfer mode

The device has to be operational and not yet set to custody transfer mode.
1. Configure the functions important for custody transfer measurement, such as the output 

setup (pulse, frequency), custody transfer variable and the measuring mode.

2. Once all the functions relevant to custody transfer have been configured, open the front lid  

and remove the display module to access the CT DIP switch group. The flowmeter is set 

to custody transfer mode by setting the DIP switch (4) in "ON" position as shown in the 

figure below.

2))

21

)&

 

Figure C-2

CT switch (4) "ON"

Note
Protected parameters
Parameters protected in CT mode are listed in Parameter protection in custody transfer 

mode (Page 316).

)&

&7

3. Remove lid lock screw of display lid.
4. Remove display lid.
5. Carefully pull out local display.
6. Set DIP switch to CT mode.
7. Carefully push display back into housing.
8. Remove O-ring from lid.

Custody Transfer

C.3 Setting up custody transfer mode

FC430 (From firmware 4.0)

Operating Instructions, 06/2017, A5E39789392-AA

313

Содержание SITRANS FC430























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды