manualshive.com logo in svg

Siemens SITRANS FC430, Руководство по эксплуатации

Поделиться
Скачать
Siemens SITRANS FC430 Скачать руководство пользователя страница 189

9.6

Return procedure

Enclose the bill of lading, return document and decontamination certificate in a clear plastic 

pouch and attach it firmly to the outside of the packaging.

Required forms

● Delivery note
● Return goods delivery note (

http://www.siemens.com/processinstrumentation/

returngoodsnote

)

with the following information:
– Product (item description)
– Number of returned devices/replacement parts
– Reason for returning the item(s)

● Decontamination declaration (

http://www.siemens.com/sc/declarationofdecontamination

)

With this declaration you warrant "that the device/replacement part has been carefully 

cleaned and is free of residues. The device/replacement part does not pose a hazard for 

humans and the environment."

If the returned device/replacement part has come into contact with poisonous, corrosive, 

flammable or water-contaminating substances, you must thoroughly clean and 

decontaminate the device/replacement part before returning it in order to ensure that all 

hollow areas are free from hazardous substances. Check the item after it has been cleaned.

Any devices/replacement parts returned without a decontamination declaration will be 

cleaned at your expense before further processing.

9.7

Disposal

Devices described in this manual should be recycled. They may not be 

disposed of in the municipal waste disposal services according to the Di‐

rective 2012/19/EC on waste electronic and electrical equipment (WEEE).
Devices can be returned to the supplier within the EC, or to a locally ap‐

proved disposal service for eco-friendly recycling. Observe the specific reg‐

ulations valid in your country.
Further information about devices containing batteries can be found at: In‐

formation about battery / product return (WEEE) (

https://

support.industry.siemens.com/cs/document/109479891/

)

Note
Special disposal required
The device includes components that require special disposal.
● Dispose of the device properly and environmentally through a local waste disposal 

contractor.

Service and maintenance

9.7 Disposal

FC430 (From firmware 4.0)

Operating Instructions, 06/2017, A5E39789392-AA

189

Содержание SITRANS FC430























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды