Siemens SITRANS FC410, Руководство по эксплуатации, Страница: 69 / 160

Commissioning
6.14 Process variables
FC410 with Modbus
Operating Instructions, 02/2016, A5E33120874-AC
67
6. During the process a progress bar is visible.
7. At the end of the zero adjustment, the outcome is displayed as an offset and a standard
deviation.
Note
If you get an error message after the zero point adjustment, refer to Alarms and system
messages (Page 79).
The system is now ready for normal operation.
6.14 Process variables
1. To compare outputs in real time select View → Process Variables to see all process
values, totalizers and loop current.
2. Verify that the process values show the expected values.
Image 6-11 Process variables
Trend view
Open the menu View → Process Variables and click on one of the Trend View buttons to
monitor the trend of one or all process values available at each tab.