Siemens SITRANS FC410, Руководство по эксплуатации, Страница: 56 / 160

Commissioning
6.7 Adding device to communication network
FC410 with Modbus
54
Operating Instructions, 02/2016, A5E33120874-AC
6.7 Adding device to communication network
Before setting the parameters, it is necessary to configure the FC410 project in PDM.
1.
Add the device to SIMATIC Modbus network:
–
Select File → New
Type in a project name, for example
FC410 commissioning
.
– Go to View and select Process Device Network view.
– Right-click on the typed in
Project name
and select Insert New Object → Networks .
– Right-click on Networks and Insert New Object → Communication Network .
– Click on Assign Device Type and select Modbus Network.
Click OK two times. Your PC is now added to the Modbus Network.
– Right-click Modbus Network and select Insert New Object → Object .
– Click on Assign Device Type, and select Devices → Modbus → Sensors → Flow →
Coriolis → SIEMENS AG → SITRANS FC410
Click OK two times.
Image 6-1 Assigning Modbus device to network
2. Set up the communication parameters for SIMATIC Modbus network:
–
Select Networks → My computer , right-click on COM Port Interface and select Object
Properties.
– Select the Communication tab and configure the communication parameters. FC410
default settings are:
- Transmission rate: 19200 baud
- Parity: even