Siemens SITRANS FC410, Руководство по эксплуатации, Страница: 101 / 160

Technical data
11.8 Design
FC410 with Modbus
Operating Instructions, 02/2016, A5E33120874-AC
99
11.8 Design
Table 11- 25 Design
Description Specification
Dimension and weight See Dimensions and weight (Page 111)
Process connectors
• EN1092-1 B1, PN16, PN40, PN63, PN100,
PN160
•
EN1092-1 D (gasket groove), PN40, PN63,
PN100, PN160
• ISO 228-1 G *
•
ASME B1.20.1 NPT *
• ASME B16.5, Cl 150, Cl 300, Cl 600, Cl 900
•
DIN 11851 **
• DIN 32676 *
•
DIN 11864-1A **, DIN 11864-2C (inch) **, DIN
11864-3A **
• ISO 2852 **
•
ISO 2853 **
• JIS B 2220, 10K, 20K, 40K, 62K
Electrical connection
•
M12 connector with 4-wire cable
• Standard cable with polymer / brass / stain-
less steel cable glands (metric or NPT)
•
Armored cable with stainless steel armored
cable glands (metric or NPT)
• Conduit entries (metric or NPT)
Material
Measuring tubes
• AISI 316L / W1.4404
•
Hastelloy C22 / UNS N06022
Process connectors
• Standard:
–
AISI 316L / W1.4435 or W1.4404
– Hastelloy C22 / UNS N06022
•
Hygienic:
–
AISI 316L / W1.4435
Sensor enclosure AISI 304 / W1.4301
Transmitter enclosure Aluminum with corrosion-resistant coating
Measuring tube design Split flow through 2 parallel tubes with combined
cross-section area 50% of the nominal pipe
The measuring tubes are bent in a trapezoidal
curve