Siemens SITRANS FC330 Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 280

Siemens SITRANS FC330 Скачать руководство пользователя страница 41

NOTICE
Incorrect mounting
The device can be damaged, destroyed, or its functionality impaired through improper

mounting.
● Before installing ensure there is no visible damage to the device.
● Make sure that process connectors are clean, and suitable gaskets and glands are used.
● Mount the device using suitable tools. Refer to the information in Technical data

(Page 195).

4.2

Installation instructions

4.2.1

Transmitter installation

CAUTION

Opening lid
Care must be taken when opening the lid to avoid the lid falling.

Note
Hygienic applications
If the device is wall or pipe-mounted in a hygienic application, always use domed nuts.

4.2.1.1

Remote field mount

Mounting on wall

1. Prepare holes with aid of mounting bracket, see Mounting bracket dimensions (Page 223).
2. Fasten mounting bracket with black cushion pad to wall (torque 10 Nm).

Installing/mounting

4.2 Installation instructions

SITRANS FC330

Operating Instructions, 01/2019, A5E44030648-AB

41

«
...
39
40
41
42
43
...
»

Содержание SITRANS FC330

























































































































































































































































































Отзывы:

Нет отзывов