Siemens SITRANS FC330, Руководство по эксплуатации, Страница: 260 / 280

C.10 Menu item 3.2: Diagnostic events
Table C-18 Diagnostic events
Level 3 Level 4 Level 5
No. Name No. Name No. Name
3.2.1 Active diagnostic events
3.2.2 Diagnostic log
3.2.3 Clear diagnostic log
3.2.4 Alarm acknowledge mode
3.2.5 Transmitter detail alarms
3.2.6 Suppression time
3.2.7 Enable alarms 3.2.7.1 Sensor alarms (group 1)
3.2.7.2 Sensor alarms (group 2)
3.2.7.3 Process alarms (group 1)
3.2.7.4 Process alarms (group 2)
3.2.7.7 Totalizers alarms
3.2.7.8 Device alarms
3.2.7.9 Simulation alarms (group
1)
3.2.7.10 Simulation alarms (group
2)
3.2.7.11 Input/output alarms
(group 1)
3.2.7.13 Dosing alarms
3.2.8 Alarm class assignment 3.2.8.8
148 Transm. temp above
alarm limit
3.2.8.9
149 Transm. temp above
alarm limit
Note
Transmitter detail alarms
Menu item 3.2.5 Transmitter detail alarms is only visible in case an alarm with detailed alarm
information is pending.
HMI menu structure
C.10 Menu item 3.2: Diagnostic events
SITRANS FC330
260
Operating Instructions, 01/2019, A5E44030648-AB