Siemens SITRANS FC330, Руководство по эксплуатации, Страница: 17 / 280

Pressure equipment
directive PED
2014/68/EU
Directive of the European Parliament and of the Council on the approxi‐
mation of the laws of the Member States concerning pressure equipment
2011/65/EU RoHS Directive of the European Parliament and the Council on the restriction of
the use of certain hazardous substances in electrical and electronic
equipment
The applicable directives can be found in the EC conformity declaration of the specific device.
Note
CE declaration
The CE declaration certificate is available on the SensorFlash SD card delivered with the
device.
See also
Certificates ( http://www.siemens.com/processinstrumentation/certificates )
2.3 Requirements for special applications
Due to the large number of possible applications, each detail of the described device versions
for each possible scenario during commissioning, operation, maintenance or operation in
systems cannot be considered in the instructions. If you need additional information not
covered by these instructions, contact your local Siemens office or company representative.
Note
Operation under special ambient conditions
We highly recommend that you contact your Siemens representative or our application
department before you operate the device under special ambient conditions as can be
encountered in nuclear power plants or when the device is used for research and development
purposes.
2.4 Use in hazardous areas
Special conditions for safe use
In general, it is required that:
● EN/IEC 60079-14 is considered for installation in hazardous areas.
● Appropriate cable connectors are used.
Safety notes
2.4 Use in hazardous areas
SITRANS FC330
Operating Instructions, 01/2019, A5E44030648-AB
17