manualshive.com logo in svg

Siemens SITRANS FC330, Руководство по эксплуатации, Страница: 159 / 280

Поделиться
Скачать
Siemens SITRANS FC330 Скачать руководство пользователя страница 159

Service and maintenance

9

9.1

Basic safety notes

Note
The device is maintenance-free.

The device is maintenance-free. However, a periodic inspection according to pertinent 

directives and regulations must be carried out.   
An inspection can include, for example, check of:
● Ambient conditions
● Seal integrity of the process connections, cable entries, and cover
● Reliability of power supply, lightning protection, and grounds

WARNING

Dust layers above 5 mm
Risk of explosion in hazardous areas.
Device may overheat due to dust build up.
● Remove dust layers in excess of 5 mm.

WARNING

Leaks in the sample gas path
Risk of poisoning. 
When measuring toxic process media, these can be released or collect in the device if there 

are leaks in the sample gas path.
● Purge the device as described in Commissioning (Page 81).
● Dispose of the toxic process media displaced by purging in an environmentally friendly 

manner.

WARNING

Use of a computer in a hazardous area
If the interface to the computer is used in the hazardous area, there is a risk of explosion.
● Ensure that the atmosphere is explosion-free (hot work permit).

SITRANS FC330

Operating Instructions, 01/2019, A5E44030648-AB

159

Содержание SITRANS FC330

























































































































































































































































































Отзывы:

Нет отзывов