Siemens SITRANS FC310 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 54

Siemens SITRANS FC310 Скачать руководство пользователя страница 40

CAUTION

Releasing button lock
Improper modification of parameters could influence process safety.
● Make sure that only authorized personnel may cancel the button locking of devices for

safety-related applications.

NOTICE
Penetration of moisture into the device
Device damage.
● Make sure when carrying out cleaning and maintenance work that no moisture penetrates

the inside of the device.

6.2

Cleaning

Cleaning the enclosure

● Clean the outside of the enclosure with the inscriptions and the display window using a cloth

moistened with water or a mild detergent.

● Do not use any aggressive cleansing agents or solvents, e.g. acetone. Plastic parts or the

painted surface could be damaged. The inscriptions could become unreadable.

WARNING

Electrostatic charge
Risk of explosion in hazardous areas if electrostatic charges develop, for example, when

cleaning plastic surfaces with a dry cloth.
● Prevent electrostatic charging in hazardous areas.

NOTICE
Improper cleaning of diaphragm
Device damage. The diaphragm can be damaged.
● Do not use sharp or hard objects to clean the diaphragm.

Service and maintenance
6.2 Cleaning

SITRANS FC310

40

Compact Operating Instructions, 01/2019, A5E44932112-AB

«
...
38
39
40
41
42
...
»

Содержание SITRANS FC310























































Отзывы:

Нет отзывов