
HART Communications
4.4 HART F US1010 Setup
F US Clamp-on Communications Protocol Manual
46
Hardware Installation Manual, 11/2015, A5E34981613-AC
Command 131 - Read HART Variable Units Description
Table 4- 38 Request
Description
Byte
Format
Comments/Value
HART_Device_Variable_Number
0
U-8
0-243
Character Count requested
1
U-8
1-32
Table 4- 39 Response
Description
Byte
Format
Comments/Value
HART_Device_Variable_Number
0
U-8
0-243
Character Count
1
U-8
1-32
Device Variable Description
2-n
Character
32 ASCII (Unpacked Characters)
4.4
HART F US1010 Setup
Introduction
This section details the HART Device Variables and how to assign them to Dynamic
Variables (PV, SV, TV, & QV). Figure 4-1 illustrates a typical connection setup. Refer to
Section 2 for more details on the SITRANS F US Clamp-on Communication Module.
The SITRANS F US Clamp-on Communications Module, in addition to providing various
communication protocols, including BACnet, Modbus, EIP & N2, also includes a HART 4-20
mA output that is always active regardless of other protocols selected. This document details
the HART Device Variables and how to assign them to Dynamic Variables (PV, SV, TV and
QV). The figure below illustrates a typical connection setup.