Siemens SITRANS F TRANSMAG 2, Руководство по эксплуатации, Страница: 72 / 126

You can enter tag-specific data in these menu items. The and operating elements take on
the function of a cursor control here. The numbers, letters and text characters are selected with
the and operating elements.
If no text is stored, the end of text character flashes when opening these menu items.
Actuation of the and operating elements moves the end of text character one position to
the right and a character can be selected from the character set. The following characters are
available:
<
>
< > >
Output
position
ä,à...é...ß...ü a-z blank 0-9 A-Z < >.,-:/*
The selected character is transferred by pressing the operating element and the end of text
character flashes again. Another character can be selected with the and operating
elements. Text input is ended by actuating the operating element when the end of text character
flashes.
The number of characters is limited to:
Table 8-4 Max. number of characters
PROFIBUS HART
• Tag number (TAG):
32 characters 8 characters
• Tag name:
32 characters 16 characters
• Tag message
32 characters 32 characters
The Hart communication transmits only capital letters. For texts with more than 16 characters,
the marks and in the first and last segment of the device display respectively indicate that
there are other characters to the left and/or right of the displayed text.
You delete text by selecting the end of text character from the character set with the and
operating elements and then actuating the operating element. All inputs to the right of the
end of text character are then deleted.
Note
When the and operating elements are actuated continuously (your finger stays on the
glass panel), the characters are scrolled automatically.
Manufacturer data, menu item 5.2
You can read out the serial number, order number and software version of the device in the
individual menu items.
Functions
8.6 Function Group Identification
TRANSMAG 2 with MAG 911/E
72
Operating Instructions, 03/2021, A5E00102775-AC