Siemens SITRANS F M MAG 3100 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 90

Siemens SITRANS F M MAG 3100 Скачать руководство пользователя страница 5

Introduction

1

1.1

Purpose of this documentation

These instructions contain all information required to commission and use the device. Read the
instructions carefully prior to installation and commissioning. In order to use the device
correctly, first review its principle of operation.

The instructions are aimed at persons mechanically installing the device, connecting it
electronically, configuring the parameters and commissioning it, as well as service and
maintenance engineers.

1.2

Document history

The contents of these instructions are regularly reviewed and corrections are included in
subsequent editions. We welcome all suggestions for improvement.

The following table shows the most important changes in the documentation compared to each
previous edition.

Edition

Remarks

12/2021

Update to include new DN32 variant and Class 600 flanges:
• Updated PED table
• Updated process connection table
• Updated dimensions and weights table
• Updated coil resistance table

09/2021

Updated nameplate
Updated safety notes
Updated remote installation
Updated technical specifications
Updated coil resistance table
Updated torque values

09/2012

Updated temperature specifications
Updated coil resistance table

12/2011

General update
Updated ATEX approval

06/2010

First edition
The Operating Instruction replaces:
• MAG 3100 part of SITRANS F M HANDBOOK
• MAG 3100 part of SITRANS F M MAG 6000 I Ex d Operating Instructions
• MAG 3100 part of SITRANS F M MAG 6000 19" & Safety Barrier Operating Instructions
• MAG 3100 Instructions
• MAG 3100 with PTFE and PFA liners Instructions

SITRANS FM MAG 3100
Operating Instructions, 12/2021, A5E03005599-AE

5

«
...
3
4
5
6
7
...
»

Содержание SITRANS F M MAG 3100



























































































Отзывы:

Нет отзывов