manualshive.com logo in svg

Siemens SITRANS F M MAG 3100, Руководство по эксплуатации, Страница: 28 / 90

Поделиться
Скачать
Siemens SITRANS F M MAG 3100 Скачать руководство пользователя страница 28

4.3

Mounting

Installation conditions

The following points must be observed during installation:

• Install the sensor in rigid pipelines in order to support the weight of the meter.

• The device must be installed without mechanical tension (torsion, bending).

• Install flange devices with plane parallel counter-flanges and only use appropriate gaskets.

• Use proper gaskets made from a material that is compatible with the measuring medium and 

measuring medium temperature.

• Gaskets must not extend into the flow area, since possible turbulence could influence the 

accuracy of the device.

• The piping may not exert any inadmissible forces or torques on the device.

• Make sure that the temperature limits are not scaled up during operation of the device.

• Vacuum shocks in the piping should be avoided to prevent damage to the liners (PTFE liner). 

Vacuum shocks can destroy the device.

• Do not remove the blind plugs in the cable glands until you are ready to install the electrical 

cable

• If earthing rings are used, use standard flange gaskets on both sides of the ring.

Figure 4-8

Correct installation with gaskets

Figure 4-9

Inlet protection

Installing/Mounting
4.3 Mounting

SITRANS FM MAG 3100

28

Operating Instructions, 12/2021, A5E03005599-AE

Содержание SITRANS F M MAG 3100



























































































Отзывы:

Нет отзывов