manualshive.com logo in svg

Siemens SITRANS F FUE380, Руководство по эксплуатации, Страница: 9 / 102

Поделиться
Скачать
Siemens SITRANS F FUE380 Скачать руководство пользователя страница 9

Note
Scope of delivery may vary, depending on version and add-ons. Make sure the scope of 

delivery and the information on the nameplate correspond to your order and the delivery note. 

1.4

Checking the consignment

1. Check the packaging and the device for visible damage caused by inappropriate handling 

during shipping.

2. Report any claims for damages immediately to the shipping company.
3. Retain damaged parts for clarification.
4. Check the scope of delivery by comparing your order to the shipping documents for 

correctness and completeness.  

1.5

Device identification

The FUS380 or FUE380 flowmeter is delivered with different labels (nameplates) on the 

transmitter and sensor. The transmitter and sensor are matched paired. 
The transmitter has two nameplates. One (silver) is placed on the front of the transmitter. The 

transmitter system nameplate (white) is placed on the right side of the transmitter. Both provide 

valuable information about the device and system. The sensor system nameplate (white) is 

placed on middle of the sensor.

Note
Identification
Identify your device by comparing your ordering data with the information on the product and 

specification nameplates.

Introduction

1.5 Device identification

FUS380/FUE380

Operating Instructions, 09/2016, A5E00730100-AB

9

Содержание SITRANS F FUE380







































































































Отзывы:

Нет отзывов