manualshive.com logo in svg

Siemens SITRANS F FUE380, Руководство по эксплуатации, Страница: 66 / 102

Поделиться
Скачать
Siemens SITRANS F FUE380 Скачать руководство пользователя страница 66

Resetting the internal battery counter

After replacing the batteries, reset the internal battery counter in order to indicate the power 

capacity correctly.

Note
Battery capacity
The transmitter setting for the battery capacity is pre-configured by the ordered version. To 

ensure the correct battery status calculation the replacement battery shall be the same type 

and have the specific capacity. 

8.3

Technical support

If you have any technical questions about the device described in these Operating Instructions 

and do not find the right answers, you can contact Customer Support:     
● Via the Internet using the Support Request: 

 Support request (

http://www.siemens.com/automation/support-request

) 

● Via Phone:

– Europe: +49 (0)911 895 7222
– America: +1 423 262 5710
– Asia-Pacific: +86 10 6475 7575

Further information about our technical support is available on the Internet at 

 Technical support (

http://support.automation.siemens.com/WW/view/en/16604318

) 

Service & Support on the Internet

In addition to our documentation, we offer a comprehensive knowledge base online on the 

Internet at: 
Service and support (

http://www.siemens.com/automation/service&support

) 

There you will find:
● The latest product information, FAQs, downloads, tips and tricks.
● Our newsletter, providing you with the latest information about your products.
● Our bulletin board, where users and specialists share their knowledge worldwide.
● You can find your local contact partner for Industry Automation and Drives Technologies 

in our partner database.

● Information about field service, repairs, spare parts and lots more under Services.

Additional Support   

 If you have additional questions about the device, please contact your local Siemens 

representative and offices at:

Service and maintenance
8.3 Technical support

FUS380/FUE380

66

Operating Instructions, 09/2016, A5E00730100-AB

Содержание SITRANS F FUE380







































































































Отзывы:

Нет отзывов