Siemens SITRANS F FUE380 Скачать руководство пользователя страница 53

Страница: 53 / 102

6.4.4

Configuring the device

In the following it is described how to configure the device by defining all sensor specific

parameters.

Note
Measurement accuracy
A correct flowmeter installation is required to ensure optimum measurement accuracy.

Read all parameters

Before any parameterization is done it is necessary to read all parameters from the device into

the offline table of SIMATIC PDM. The offline table merely contains default data.
1. Open PDM device driver.
2. Select Upload to PG/PC .. and click [Start] to read all parameters to the offline table.

After closing the dialog box, all loaded parameters should show

(Loaded) in the status

of the PDM table; except date and time formats, they show

(Changed).

3. Store factory set default values on your local PC [File → Export] in order to be able to retrieve

default settings.

Read, write device data

Only parameters (data) shown with white background can be changed.

Note
Status field
●

indicates changed off-line data not yet stored in the device.

●

indicates actual data downloaded to the device.

Commissioning

6.4 Commissioning via PDM

FUS380/FUE380

Operating Instructions, 09/2016, A5E00730100-AB

Содержание SITRANS F FUE380







































































































Результаты поиска

Содержание SITRANS F FUE380

Отзывы:

Siemens SITRANS F FUE380, Руководство по эксплуатации, Страница: 53 / 102

Результаты поиска

Содержание SITRANS F FUE380

Отзывы: