Siemens SITRANS CC220 Скачать руководство пользователя страница 31

Страница: 31 / 80

5.2.3

Installing SITRANS MS200 on a pump or compressor

Mount SITRANS MS200 near the liquid inlet directly on the pump.

Note

SITRANS MS200 must not get in direct contact with chemicals.

NOTICE
Maximum specified ambient temperature

The maximum specified ambient temperature must not be exceeded by the pump or
compressor. See Technical specifications SITRANS MS200 (Page 71).

5.2.4

Installing SITRANS MS200 on a gear

Mount SITRANS MS200 directly on the gear. The most suitable place is at the middle of the gear
in the horizontal position.

NOTICE
Maximum specified ambient temperature

The maximum specified ambient temperature must not be exceeded by the gear. See Technical
specifications SITRANS MS200 (Page 71).

Note

SITRANS MS200 must not get in contact with gear oil or gear oil vapors.

5.2.5

Installing SITRANS MS200 on rotating or vibrating equipment

Any rotating or vibrating equipment can be supervised with SITRANS MS200. Mount SITRANS
MS200 as close as possible to vibrating components.

NOTICE
Maximum specified ambient temperature

The maximum specified ambient temperature must not be exceeded by the rotating or
vibrating equipment. See Technical specifications SITRANS MS200 (Page 71).

Installing/mounting

5.2 Installation instructions SITRANS MS200

Smart Condition Monitoring with IIoT Sensors
Operating Instructions, 08/2021, A5E50573389-AA

Содержание SITRANS CC220

















































































Результаты поиска

Содержание SITRANS CC220

Отзывы:

Siemens SITRANS CC220, Руководство по эксплуатации, Страница: 31 / 80

Результаты поиска

Содержание SITRANS CC220

Отзывы: