3. Insert the new battery unit in the compartment and make sure that the clips of the battery unit
lock audibly into the indentations at the top and bottom of the compartment.
4. Plug the battery connecting cable into the socket on the board cover.
Note
Update date of last battery change
Please remember that after replacing the battery unit in SIMATIC PDM, the "Battery
change" button must be pressed so that the WirelessHART adapter sets the date of the "last
battery change" to the current date. See also the section "Configuring the power supply".
(Page 58)
10.2
Return process for battery-operated devices
WARNING
Remove the battery unit before returning the device
Before returning the device, remove the battery unit. Battery units must not be returned.
Lithium thionyl chloride high-performance batteries belong to dangerous goods class 9:
Miscellaneous hazardous materials and substances. Read the accompanying safety data
sheet.
Return procedure
Attach the bill of lading, returned goods document and decontamination certificate in a firmly
affixed clear plastic pouch on the outside of the packaging.
Maintenance and service
10.2 Return process for battery-operated devices
WirelessHART Adapter SITRANS AW200
64
Operating Instructions, 02/2020, A5E02777161-AA
