Parameter
Meaning
Example
Default
Join now
If you press this button, the "network search
time" and "join mode" are written to the Wireles‐
sHART adapter and then used.
● If the "join mode" is set to "join now", the
WirelessHART adapter attempts to join the
network.
Join status
Provides further details on the current status
during the attempt to join the network:
● Wireless signal found
● Wireless signal identified
● Wireless time synchronized: Synchronized
with the network in terms of time
● WirelessHART signal identified
● Network admission requested
● Join retrying
● Join failed
● Network security clearance granted
● Network joined
● Network bandwidth requested
● Connection was established
Neighbor count
Specifies the number of WirelessHART devices
in the neighborhood to which a connection is
established.
Number of requests
Specifies the number of packages requesting
entry to the network sent by neighboring devi‐
ces or network managers and received by the
WirelessHART adapter.
Join attempts
Specifies the number of attempts made by the
WirelessHART adapter to join the network be‐
fore it succeeded.
Network search time [s] Time in seconds during which the Wireles‐
sHART adapter attempts to allow other adapt‐
ers faster connection establishment to the net‐
work.
Request Active Adver‐
tising
Pressing this button activates the "network
search time" on the WirelessHART adapter.
9.4
Wired communication
Here, you configure the parameters required to set up HART communication between the
WirelessHART adapter and one or more HART devices.
Parameter assignment/addressing
9.4 Wired communication
WirelessHART Adapter SITRANS AW200
Operating Instructions, 02/2020, A5E02777161-AA
53
