Operation
5.6 Parameter descriptions
SITRANS TF280 WirelessHART
54
Operating Instructions, 10/2010, A5E02619566-02
5.6.4
"4 Communication"
5.6.4.1
"4.1 Wireless"
"4.1.1 Network ID"
Factory setting:
1229
Setting range:
00001 ... 65535
Purpose:
Assign network ID
Description:
Commissioning requirement. Password-protected function.
Corresponds to parameter "1.1 Network ID" (Page 44) .
"4.1.2 Network key"
Factory setting:
-
Setting range:
32-digit, hexadecimal
Purpose:
Assign network key
Description:
Commissioning requirement. Password-protected function.
Corresponds to parameter "1.2 Network key" (Page 44) .
"4.1.3 Connect network"
Requirements:
Wireless HART gateway is prepared.
All parameters required for commissioning are set.
See menu "1 Quick start" (Page 44)
Factory setting:
-
Setting range:
START
Purpose:
Connect device to wireless HART network.
Description:
Start establishment of the connection by pressing the M key.
Establishment of the connection is displayed in the measured value view.
The supplementary message is deleted when the connection has been
established successfully.
Corresponds to parameter "1.6 Connect network" (Page 45) .
