Operator control at the device
3.1 Setting the output voltage and response threshold value of the output current
PSU8600power supply systems
Manual, 04.2016, A5E35883207-7-76
53
3.1
Setting the output voltage and response threshold value of the
output current
The potentiometer of the corresponding output is used to set the output voltage and the
response threshold value of the output current.
Note
When the REMOTE operating mode is activated (see MANUAL and REMOTE operating
modes (Page 59)) changes made to the settings of the potentiometer for the output voltage
and response threshold value of the output current have no effect.
Assigning the potentiometers to the outputs:
①
Output number
②
Voltage potentiometer for the particular output
③
Current potentiometer for the particular output
3.1.1
Setting the output voltage
1.
Using the appropriate screwdriver, rotate the voltage potentiometer for the corresponding
output so that the notch in the inner ring points to the required value (the following
diagram shows a setting for 15 V).
Values between 5 and 28 Volt can be set.
When supplied, the output voltage is set to 24 Volt.
Содержание SITOP BUF8600
