manualshive.com logo in svg

Siemens SIRIUS, Системное руководство, Страница: 325 / 425

Поделиться
Скачать
Siemens SIRIUS Скачать руководство пользователя страница 325

3RH, 3TX, LZX coupling links

SIRIUS System Manual

GWA 4NEB 430 0999-02b

6-5

6.2.2 Coupling links in two-tier and box terminal format

Features

• Connections at two levels
• Very narrow design, as of 6.2 mm
• Terminal system: screw-type and Cage Clamp
• Labeling strip to identify equipment

Models

The 3TX70 coupling links for SIRIUS are available as both input couplers and 
output couplers, which have their terminals in different positions:

Figure 6-1: Output couplerInput coupler

Input coupling links have hard gold-plated contacts for greater contact reli-
ability at low voltages and currents.

Status indication

A yellow status LED on the drive circuit side indicates whether there is any 
control supply voltage applied to the coupler.

Protective circuit

There is an integrated rectifier at the input of each coupler. As a result, they 
are protected against polarity reversal. The rectifiers function as flywheeling 
diodes at disconnection. Semiconductor outputs are protected by suppres-
sor or Zener diodes.

Manual-0-automatic

Some coupling links are equipped with a manual-0-automatic switch that 
makes it easier to switch the system on and is used for test purposes.
• Manual:

Relay is always on

• O (zero):

Relay is always off

• Automatic:

Relay follows the control supply voltage 

Power consumption

Following on from the technical specifications of the electronic systems, the 
coupling links have low power consumption. They can be controlled from a 
programmable controller and are suitable for continuous duty.

Accessories

The following accessories are available for two-tier coupling links:
• 24-pole connecting lead or connection comb
• Screwdriver for Cage Clamp terminal system
• End holder and end plate

A1

A2

13

14

A1

A2

13

14

Содержание SIRIUS










































































































































































































































































































































































































































Отзывы:

Нет отзывов