Siemens SIRIUS ACT 3SU1 Скачать руководство пользователя страница 388

Страница: 388 / 610

3SU19 accessories

13.2 Identification of command points

SIRIUS ACT 3SU1 pushbuttons and signaling devices

388

System Manual, 08/2018, A5E03457306020A/RS-AK/010

13.2.3

Label holders

Label holders are used for simple labeling of command points in conjunction with labeling

plates.

Label holders are available in different variants (for sticking or for snap-on mounting).
The label holders are suitable for:

●

Mounting with enclosures without a recess for a labeling plate

Note that only front plate mounting is possible.

●

Front plate mounting

Also note the information in Chapters "Combination options of the accessories (Page 435)"

and "Use of accessories for the enclosure (Page 437)".
Siemens Industry Mall

(

https://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10231447

)

Note
The use of label holders reduces the front plate thickness that can be clamped to < 4 mm.

Note
No combinations of label holders and protective caps are permitted.

Содержание SIRIUS ACT 3SU1



































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SIRIUS ACT 3SU1

Отзывы:

Siemens SIRIUS ACT 3SU1, Системное руководство, Страница: 388 / 610

Результаты поиска

Содержание SIRIUS ACT 3SU1

Отзывы: