manualshive.com logo in svg

Siemens SIRIUS 3RW51, Руководство по эксплуатации оборудования, Страница: 155 / 210

Поделиться
Скачать
Siemens SIRIUS 3RW51 Скачать руководство пользователя страница 155

1. Select the folder of the respective device.

2. Select the firmware file of the device and confirm with "OK" key.

You can see the firmware update is being performed from the progress bar on the display. 
Following successful updating of the firmware, the respective device then restarts 
automatically.

3. Check the new firmware version in the "Overview" menu.

Result

You have performed a firmware update for a selected device using the micro SD memory card. 

10.4

Restore factory setting

Effects of the factory setting

The following devices can be reset to the factory setting:

• 3RW51 soft starter

– The parameters of the 3RW51 soft starter that were not set by means of setting elements 

are reset.

• 3RW5 communication module

– The parameters of the 3RW5 communication module are reset.

• 3RW5 HMI High Feature

– The parameters of the 3RW5 HMI High Feature and the PIN for access protection are reset 

to the factory setting.

• All devices

– The 3RW51 soft starter, the 3RW5 communication module, and the 3RW5 HMI High 

Feature are reset to the factory settings, as described above.

Requirements

The master control lies with the source of the command to restore the factory setting.

Maintenance and servicing

10.4 Restore factory setting

SIRIUS 3RW51 Soft Starter
Equipment Manual, 09/2020, A5E37108631002A/RS-AC/003

155

Содержание SIRIUS 3RW51



















































































































































































































Отзывы:

Нет отзывов