Siemens SIRIUS 3RH Series Скачать руководство пользователя страница 89

Страница: 89 / 786

System overview

1.10 Connection to the higher-level control

SIRIUS Innovations
System Manual, 01/2011, A8E56203870002-03

1.10.2

IO-Link

IO-Link is a new communication standard for sensors and actuators - defined by the

PROFIBUS User Organization (PNO). The IO-Link technology is based on a point-to-point

connection of the sensors and actuators to the control. Therefore, this technology is not a

bus system, but an enhanced version of a classic point-to-point connection. In addition to the

cyclic operating data, comprehensive parameters and diagnostics data are transferred for

the connected sensors and actuators. The same 3-wire connecting cable as currently used

for standard sensors is used.
IO-Link is:
●

An open and standardized system for transmitting device-specific data.

●

An intelligent wiring system positioned between conventional wiring and fieldbus systems.

●

A system which offers advantages in the control cabinet and is integrated in the TIA

concept.

IO-Link is thus an intelligent wiring system which is fully integrated in TIA.

1.10.2.1

Overview

Components of an IO-Link system

Only 2 components are required to use IO-Link:
●

IO-Link master

●

IO-Link device (e.g. IO-Link sensor/switching device, IO-Link I/O module)

Compatibility of IO-Link

IO-Link guarantees compatibility between standard modules and those with IO-Link

capability as follows:
●

IO-Link sensors/actuators can generally be operated on IO-Link modules (master) and on

standard I/O modules.

●

Both IO-Link sensors/actuators and current standard sensors/actuators can be used on

IO-Link modules (master).

●

If conventional components are used in the IO-Link system, naturally only the standard

functions are available in this case.

Expansion by means of IO-Link I/O modules

The compatibility of IO-Link means that you can connect standard (conventional)

sensors/actuators to it too. This can be implemented especially cost-effectively with IO-Link

I/O modules that permit the connection of several sensors/actuators to the controller via one

cable.

Содержание SIRIUS 3RH Series



















































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SIRIUS 3RH Series

Отзывы:

Бренды по названию

Популярные бренды

Siemens SIRIUS 3RH Series, Системное руководство

Результаты поиска

Содержание SIRIUS 3RH Series

Отзывы:

Бренды по названию

Популярные бренды