manualshive.com logo in svg

Siemens SIRIUS 3RH Series, Системное руководство

Поделиться
Скачать
Siemens SIRIUS 3RH Series Скачать руководство пользователя страница 20

System overview 

 

1.1 Introduction 

 

SIRIUS Innovations 

20

 

System Manual, 01/2011, A8E56203870002-03 

1.1.2

 

SIRIUS Innovations 

SIRIUS stands for innovation 

Siemens is constantly developing its product portfolio to enable it to meet the demands of 

industry, not only today, but in the future too. As part of this process, Siemens gathers 

customer feedback on an ongoing basis and considers it in conjunction with the global trends 

of tomorrow. 
This manual underlines Siemens' claim to be a trendsetting company which offers you the 

very best products for switching, starting, protecting, and monitoring your motors and 

systems. 

 

Figure 1-1 

Innovations in the SIRIUS modular system 

When coming up with these innovations for the SIRIUS modular system, particular 

importance was placed on reducing the amount of wiring needed, saving space, reducing the 

number of versions available, and providing operational reliability. 

Simple and straightforward connection 

The options for connecting to the higher-level control have now also been further improved: 

The SIRIUS modular system now not only features the AS-Interface, but also the IO-Link, 

which has been standardized as well. This ensures that switching devices can benefit from 

optimum interaction with our SIMATIC automation system and also with third-party controls. 
The connection to the automation level is implemented via function modules, which are 

plugged onto contactors. However, these function modules are also available in a version for 

traditional parallel wiring, as well as in versions featuring AS-i or IO-Link interfaces. This 

simple version just contains the logic for performing the star-delta (wye-delta) functions of a 

feeder, for example. There is no longer any need to carry out laborious control circuit wiring 

work. The star-delta (wye-delta) times are set directly on the function module; all necessary 

interlocks are already integrated therein. The smaller width is not only due to the higher 

performance capability of the new devices, but also to the fact that the timing relay, for 

example, which used to be connected separately, has been done away with completely.  

Содержание SIRIUS 3RH Series



















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды